![]() Using routers that do not respond to ARP requests.Setting the DHCP Class Identifier (option 60) on the DHCP server and installing the proxyDHCP on a separate machine.The PXE ROM will retry the ARP request four times, if it does not get any valid ARP replies, this message is displayed. This message is displayed if the UNDI runtime loader returns an unexpected status code. This message is displayed if a PXE API returns a status code that is not expected by the runtime loader. This message should not be seen in a production BIOS. PCI option ROMs must always be installed as DDIM option ROMs (they must be installed into read/write upper memory). PXE-E06: Option ROM requires DDIM support.If this message is displayed the PXE ROM will not boot. This can happen if the system is reset or powered down when the NIC EEPROM is being reprogrammed. ![]() This message is displayed if the NIC EEPROM contents have been corrupted. This should not happen with a production BIOS and properly operating hardware. This message is displayed if any of the PCI BIOS calls made to read the PCI configuration space return an error code. PXE-E04: Error reading PCI configuration space.If the PCI device defined in the AX register does not match the UNDI device, this error is displayed When the system BIOS initializes a PCI option ROM, it is supposed to pass the PCI bus/device/function numbers in the AX register. This message should never be seen in a production BIOS. PXE-E01: PCI Vendor and Device IDs do not match!.If this memory is not zero filled, the relocation code in the PXE ROMs will assume that this memory is being used by the system BIOS or other boot ROMs ![]() This memory must be zero filled by the system BIOS. PXE BaseCode and UNDI runtime modules are copied from FLASH or upper memory into the top of free base memory between 480K (78000h) and 640K (A0000h).
0 Comments
Leave a Reply. |